Cliffside Road

prod-content-content”>

This set adds on to the Cliffside set with a road from ground level up to the cliff top.

See the cover image for a sample of the road and cliff as assembled.

Thumbnails of models in this set

Recommended Print Settings:

  • Layer Size: 0.15mm, or 0.1mm for finer detail
  • Infill: 10% for all models recommended, 5% minimum
  • Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
  • Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
  • Raft/Brim/Supports: none

Related Sets:

  • Cliffside — the cliff side and fortress top that this road attaches to