Aztlan Sewers II: Expanded Locales

Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn’t want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.

This expansion allows for sewers of difference sizes, both half sized, double height, and 4×4 spaces. Will and Carl powered through all month to make sure we had options for multiple sewer levels.

All of us at Aether thank Carl for breathing life into this project and helping us start the most dynamic set of sewer terrain ever.

TO SEE PICTURES OF THIS SET, PLEASE GOOGLE AZTLAN SEWERS MINIHOARDER. DTRPG IMAGE SERVERS CANNOT SUPPORT THE NUMBER OF MODELS WE PUT IN THE SETS AND THEY HAVE IGNORED OUR REQUESTS FOR UPGRADING. 

RECOMMENDED PRINT SETTINGS

  • Layer Size: 0.15mm minimum. 0.1mm recommended.
  • Infill: 10% for all models recommended
  • Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
  • Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
  • Raft/Brim/Supports: None

This product is priced at $12.00

CHECK IT OUT

This is an affiliate post