AEICCV4 – Ice Cavern Mines

Dwarven mines deep in the frozen wastes. An expansion of last years Ice Caverns.

TERRAIN RECOMMENDED PRINT SETTINGS Layer Size: 0.15mm minimum. 0.1mm recommended. Infill: 10% for all models recommended Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: None

This item is produced by Aether Studios

Check it out!

This is an affiliate post.