(3D) City of Tarok: Roadside Inn

– the size of the building is 25x30x30cm!

– parts cut into pieces with working doors for easier printing 

– merged parts for rescaling and resin prints

– normal roof + roof with windows

– fireplace and other LED options

– turnable tower that you can mix with our Windmill, too!

Inn_3dprint_city_of_tarok_07.jpg

Our goal was to offer you unique buildings that can be a cheaper alternative to casted models, but still visually pleasing on your tabletop. To achieve this, we modeled all the cracks and every detail individually. You’ll find few repeating patterns on the models.

 arrow_orange.png No slicer support needed!

Our models do not need slicer support, we designed the parts to print well without them. The time for printing will be faster and you don’t have to throw away your support material. 

Inn_3dprint_city_of_tarok_14.jpg

We’ve cut bigger parts into smaller pieces that you can attach easily with our hinge system. The minimum printer bed-size is 16x16cm


 arrow_orange.png Scale them for wargaming!

 You can change the size of the models in your slicer software before you print them, so it is very easy to print them at any scale from 6mm to 40mm. (Larger is also possible but you’ll need a printer with a large bed.)

You can see the first 10mm test-prints below printed on a stock Ender 3 pro:

descr_cottage_3d_printable_house_06.jpg

 arrow_orange.png Working doors and windows.

You can open and close the doors to make your tabletop more alive. 

Inn_3dprint_city_of_tarok_26.jpg

Add glass to your windows:

These windows have a slot where you can place transparent plastic foil or you can print out glass images with your inkjet printer. Use small tea lights to imitate the light inside while your players are adventuring in this area. 

This product is priced at $16.00

CHECK IT OUT

This is an affiliate post